Core Services
Surface & Material
Damage & Restoration
Prevention & Protection
Specialty Services
Source-Specific Repair
Professional water damage inspection serving Providence and surrounding areas.
Water damage in Providence often hides where you cannot see it. Behind a finished basement wall. Inside a balloon-frame cavity. Under a wood floor that looks dry on the surface. A water damage inspection in Providence from Water Damage Pros US uses thermal imaging, moisture meters, and decades of local experience to find moisture that would otherwise rot framing and feed mold.
Thermal imaging — We scan every wall, ceiling, and floor with an infrared camera. Wet materials hold heat or cold differently than dry ones, so the camera shows us where moisture is hiding without cutting a single hole.
Moisture meter readings — We take readings of wood, drywall, and concrete in multiple locations and compare them to known dry baselines.
Leak detection — If the source of the water is not obvious, we trace plumbing lines and look for signs of supply-line or drain-line leaks.
Mold assessment — We note visible mold and identify areas where moisture levels support mold growth.
Written report — You receive a document with all readings, thermal images, and a prioritized repair plan.
| Service | Typical range | What’s included |
|---|---|---|
| Basic inspection | $150 – $250 | Visual check, moisture meter readings, written report |
| Thermal imaging inspection | $250 – $400 | Full infrared scan, thermal images, written report |
| Leak detection | $200 – $600 | Plumbing trace, pressure test if needed, source identification |
| Mold assessment | $200 – $500 | Air sampling, surface sampling, lab analysis |
| Pre-purchase inspection | $300 – $500 | Full home scan for hidden moisture before buying |
Can you inspect without damaging walls? Yes. Thermal imaging finds moisture behind walls without cutting into them. We only open walls when the source must be confirmed.
How often should I inspect my Providence home? After every major storm, before winter, and after any pipe freeze or leak event. Annual checks are also recommended for older homes.
Do you inspect commercial buildings? Yes. We inspect apartments, offices, and retail spaces in Providence for hidden moisture.
If you smell mustiness, saw a water stain, or just want peace of mind after a storm, call for a free inspection estimate. Licensed inspectors, written reports, and same-day scheduling available.
Where our crews respond for water damage inspection — Providence, Providence County County, Rhode Island.
Fast, professional water damage restoration for homes and businesses — extraction, drying, and full repair.
Complete flood cleanup and restoration after rising water, storms, and overflow.
24/7 water extraction with truck-mounted pumps to remove standing water fast and limit damage.
Full structural repair and reconstruction after water damage — drywall, floors, and framing.
Cut out, replace, and repaint water-damaged drywall so walls look new again.
Specialized drying systems that save hardwood and laminate floors after water damage.
Most inspections run $150 to $400. The cost is credited toward the restoration if you proceed with us.
We use thermal imaging cameras to find temperature differences behind walls, plus moisture meters that measure the moisture content of wood and drywall.
A typical home inspection takes one to two hours. A larger building or complex leak can take longer.
Yes — musty smells, rising water bills, and recent storms can all indicate hidden moisture that only equipment can detect.
Yes. Every inspection includes a written report with moisture readings, thermal images, and repair recommendations.
Our certified technicians respond fast, assess the damage, and give you a clear plan — with no obligation and no up-front cost.