Core Services
Surface & Material
Damage & Restoration
Prevention & Protection
Specialty Services
Source-Specific Repair
Complete home water damage restoration — from first call to fully repaired and dry.
Your home is more than a building — it is where your family lives, where your belongings are stored, and where you feel safe. When water damage strikes, you need a restoration team that treats your home with care and works fast to minimize disruption. Our residential water damage restoration service handles everything from the first emergency call through the final repair — getting your home back to normal.
Residential water damage is one of the most stressful events a homeowner can face. The water may come from a burst pipe, a failed appliance, a roof leak, or a flood, and the damage can range from a soaked corner of the basement to an entire floor of the house. The restoration process follows a clear sequence — stop the water, extract it, dry the structure, clean, and rebuild. Our job is to manage that sequence so you know what is happening at every step.
| Source | Common Causes | Response Priority |
|---|---|---|
| Plumbing | Burst pipes, failed fittings, running toilets | Emergency — stop water immediately |
| Appliances | Washing machine, dishwasher, water heater failure | Emergency — shut off appliance water supply |
| Roof leaks | Storm damage, ice dams, failed flashing | Same-day — tarp and extract |
| Foundation seepage | High water table, poor drainage, cracked foundation | Assessment — waterproofing may be needed |
| Sewage backup | Main sewer blockage, septic failure | Emergency — full biohazard protocol |
| Flooding | Storm surge, river overflow, flash flooding | Emergency — full extraction and drying |
We respond 24/7. Our crew arrives within hours, assesses the damage, stops the water source, and begins emergency mitigation — extraction, tarping, board-up, or whatever is needed to prevent additional damage.
We photograph and document everything from the first visit — damage extent, water category, affected materials, and equipment placement. This documentation supports your insurance claim.
Truck-mounted pumps and industrial extracters remove standing water from floors, carpet, and accessible cavities. We extract from every affected area — not just the obvious spots.
Commercial dehumidifiers and air movers are positioned throughout the affected area. We monitor moisture levels every 24 hours and adjust equipment as needed. Drying continues until all materials reach target moisture content.
Once dry, affected surfaces are cleaned and sanitized. We use antimicrobial solutions to prevent mold growth and hospital-grade disinfectants if contamination is present.
Furniture, electronics, and personal belongings are cleaned, restored, or documented for insurance. We protect what can be saved and inventory what cannot.
Water-damaged materials are replaced — drywall, insulation, flooring, paint, trim, and fixtures. We restore your home to its pre-loss condition, matching existing finishes and materials.
We walk through the completed restoration with you, verify everything meets your expectations, and provide documentation of all work performed.
| Scope of Damage | Typical Cost Range | What’s Included |
|---|---|---|
| Small appliance leak | $1,500 – $4,000 | Extraction, drying, minor drywall and paint repair |
| Single room — burst pipe | $4,000 – $8,000 | Extraction, structural drying, drywall, flooring |
| Whole floor — supply failure | $8,000 – $15,000 | Full drying, content protection, material replacement |
| Flood or sewage event | $10,000 – $30,000+ | Removal, sanitization, rebuild |
Expert tip: Do not wait for your insurance adjuster before starting emergency mitigation. Most policies require you to take reasonable steps to prevent further damage — which means tarping, extraction, and drying should begin immediately. The mitigation cost is typically covered, and waiting only lets the damage grow.
Residential water damage follows the weather and housing patterns of each region. In the Northeast and Midwest, frozen pipes in winter and basement flooding in spring are the leading causes. In the Gulf and Atlantic coastal states, hurricanes and storm surge cause the largest residential losses. In the Southeast, high humidity and severe thunderstorms drive roof leaks and mold growth. In the Southwest, monsoon storms and slab leaks are common. Our local crews know the residential water damage patterns in their region and respond with the right approach. Check our locations page for the states and cities we currently serve, and call for residential water damage restoration near you.
Call our team for residential water damage restoration. We respond 24/7, extract water, dry your home, and restore everything — documented at every stage for your insurance claim and backed by a written warranty.
Fast, professional water damage restoration for homes and businesses — extraction, drying, and full repair.
Learn More24/7 water extraction with truck-mounted pumps to remove standing water fast and limit damage.
Learn MoreThermal and moisture mapping to locate hidden water and track the drying process.
Learn MoreSafe, certified removal of mold and mildew, with containment and air filtration.
Learn MoreFull structural repair and reconstruction after water damage — drywall, floors, and framing.
Learn MoreDetailed moisture inspection and assessment with thermal imaging to find hidden water damage.
Learn MoreFind local crews offering residential water damage restoration in your area.
261 cities
75 cities
118 cities
188 cities
469 cities
148 cities
53 cities
71 cities
355 cities
320 cities
74 cities
94 cities
651 cities
302 cities
274 cities
193 cities
211 cities
110 cities
387 cities
346 cities
54 cities
335 cities
38 cities
156 cities
Residential restoration covers the entire process — emergency assessment, water extraction, structural drying, cleaning, sanitizing, and repair. We handle everything from the first call through the final walkthrough.
Timelines vary by severity. Minor leaks may take 3 to 5 days. Major flooding or pipe bursts may take 1 to 3 weeks for drying alone, plus additional time for repair. We provide a timeline after the initial assessment.
Call us first — we begin emergency mitigation immediately to prevent additional damage. Then call your insurance company. We document everything from the first visit and coordinate with your adjuster.
A small appliance leak runs $1,500 to $4,000. A burst pipe or room-scale flood runs $4,000 to $12,000. A whole-floor or flood event runs $10,000 to $30,000+. A free inspection gives you a written estimate.
Turn off the water source if it is safe to do so, shut off electricity in the affected area, and call a restoration company immediately. Do not attempt to mop up large volumes of water or run fans until the extent is assessed.
In most cases, yes. The affected area is sealed and the drying equipment is safe. If the water is black water or the damage is extensive, we recommend staying elsewhere until the space is cleaned and dry.
Our certified technicians respond fast, assess the damage, and give you a clear plan — with no obligation and no up-front cost.